"HuttCam" code layout, graphics and quotes are © Copyright 2011 by HuttCam All rights reserved.

You may freely link but please do not "borrow" all or any part of this web site without permission. Thank you.

Website Last modified on

Sunday, 21 January 1900 12:00pm
Things to do The Hutt Valley


For Hutt Cam we use a AXIS M3114-R Megapixel Network IP Cameras  


Compact, rugged network cameras for mobile video surveillance.


AXIS M3114-R: 1 MP/HDTV 720p

- Rugged, female RJ-45 connector

Image sensor 1/4" progressive scan RGB CMOS

Lens AXIS M3113-R: 2.9 mm: 66° view*, F2.0, M12 mount

AXIS M3114-R: 2.9 mm: 80° view*, F2.0, M12 mount *horizontal angle of view

Light sensitivity 1 - 100000 lux, F2.0

Shutter time 1/24 500 s to 1/6 s

Camera angle adjustment : Pan ± 30°, tilt 0-90°, rotation ± 180°

Video Compression

H.264 (MPEG-4 Part 10/AVC)

Motion JPEG


Resolutions: 1280x800* to 160x90 *1440x900 (1.3 MP) scaled resolution available via VAPIX®

Frame rate 30 fps in all resolutions

Video streaming Multiple, individually configurable streams in H.264 and Motion JPEG Controllable frame rate and bandwidth VBR/CBR H.264


Pan/Tilt/Zoom Digital PTZ, preset positions, guard tour

Image settings Compression, color, brightness, sharpness, contrast, white balance, exposure control, exposure zones, backlight compensation, wide dynamic range - dynamic contrast, fine tuning of behavior at low light, mirroring of images,

Rotation: 0°, 90°, 180°, 270°, including Corridor Format™ Text and image overlay, privacy mask



Security Password protection, IP address filtering, HTTPS** encryption, digest authentication, user access log

Supported Protocols IPv4/v6, HTTP, HTTPS**, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS

System integration

Application Programming Interface

Open API for software integration, including VAPIX® and AXIS Camera Application Platform from Axis Communications;

specifications available at Support for AXIS Video Hosting System (AVHS) with One-Click Camera connection


Intelligent video Video motion detection, active tampering alarm Support for AXIS Camera Application Platform enabling

installation of additional applications


Alarm triggers Intelligent video

Alarm events File upload via FTP, HTTP and email Notification via email, HTTP and TCP

Video buffer 25 MB pre- and post-alarm

Installation aids in software Pixel counter



Casing IP66-, IP67- and NEMA 4X-rated, IK08 impact-resistant aluminum/plastic casing with integrated dehumidifying membrane and captive screws


Processors and memory ARTPEC-3, 128 MB RAM, 128 MB Flash

Power Power over Ethernet IEEE 802.3af Class 1, max. 3.2 W

Connectors RJ-45 variants: rugged, female RJ-45 10BASE-T/100BASE-TX M12 variants: rugged, female, D-coded M12 connector with rotatable coupling nut All connectors support Power over Ethernet


Operating conditions

-25 °C to 50 °C (-13 °F to 122 °F)


Approvals EN 55022 Class B, EN 60950-22, EN 61000-3-2, EN 61000-3-3,EN 61000-6-1, EN 61000-6-2, EN 55024, ICES-003 Class B, FCC Part 15 Subpart B Class B, VCCI Class B, ECE R10 rev.03 (E approval) C-tick AS/NZS CISPR 22, EN 60950-1, EN 50121,

IEC 60721-3-4 Class 4K3 (temperature range -25°C to 50°C) EN 50155 Class T3 (vibration, shock, bump, temperature) ISO 16750-3 (vibration), IEC 62262 Class IK08 IEC 60529 IP66/IP67, NEMA 250 Type 4X


Weight 250 g (0.55 lb.)


For Habour Cam we use a Bosch G4-300 Autodome IP Camera


The Bosch VG4-300 is a high performance PTZ dome camera designed with an emphasis on providing dependable security monitoring both day and night and in most lighting and weather conditions. As part of the AutoDome 300 Series Camera System, this dome is made up of individual components, each available for separate purchase. This makes it possible to swap, replace or upgrade a particular portion without having to buy a whole new system, thus preserving an original investment. For example, a user can install an IP module to add Internet capabilities to this camera or change the existing mount or power supply for one that better suits a particular application.